Viewing 1-25 of 72 (Page 1 of 3)    
      Next >   Last >|

Tip: Choose a vehicle from the lookup on the left to find products for your ride.

Air/Fuel Controller Gen 3 PN# AFC30

Air/Fuel Controller Gen 3

PN#: AFC30
Fitment: Universal.

Easily program in desired MAF Correction Values (in % of flow) by MAF set points. This enables the user to create their own custom MAF calibration profile. Profile can be viewed, set or updated easily and quickly on the fly.

Details »
List Price
$175.00
In Stock

Buy Now
Wishlist
Details

New Product Highly Recommended 
Auto TCS Off Module, Universal Wire Splice PN# TCS10-U

Auto TCS Off Module, Universal Wire Splice

PN#: TCS10-U
Fitment: Universal.

Allows late model vehicles equipped with Traction Control System to start up with the TCS Off mode rather than in the OEM default On mode. The TCS module will not cause any trouble codes to be tripped by any of the onboard computer control systems. After installation, the OEM TSC button operates normally. Simple wiring is unversally adaptable to a wide variety of vehicles. Features • Retains normal TCS Button function • Will not cause any trouble codes to be tripped by any of the onboard computer control systems • Very low current microelectronics results in negligible power draw on power source circuit

Details »
List Price
$34.00
In Stock

Buy Now
Wishlist
Details

Flow Charger - Voltage Booster PN# FCM12-165

Flow Charger - Voltage Booster

PN#: FCM12-165
Fitment: Universal.

Flow Charger is a compact, high efficiency microprocessor based voltage boosting unit. It receives standard vehicle voltages and boosts the output voltage to 20 volts (on Adjustable Output Voltage Models). This is particularly useful for increasing the output capacity of the vehicle's fuel pump by 20%, as shipped. This increase is equally applied to both stock fuel pumps or aftermarket fuel pumps. Voltage can be adjusted higher for larger gains, when using an optional voltage selector unit.

Details »
List Price
$185.00
In Stock

Buy Now
Wishlist
Details

Featured Product 
Flow Charger - Voltage Booster with Time Delay PN# FCM12-165TD

Flow Charger - Voltage Booster with Time Delay

PN#: FCM12-165TD
Fitment: Universal.

Flow Charger is a compact, high efficiency microprocessor based voltage boosting unit. It receives standard vehicle voltages and boosts the output voltage to 20 volts (on Adjustable Output Voltage Models).

Details »
List Price
$195.00
In Stock

Buy Now
Wishlist
Details

Featured Product 
Flow Charger Trigger Pigtail Harness PN# FTH10

Flow Charger Trigger Pigtail Harness

PN#: FTH10
Fitment: Universal.

Flow Charger Trigger Pigtail Harness - 6 inches

Details »
List Price
$6.00
In Stock

Buy Now
Wishlist
Details

Flow Charger Voltage Pill, 15.5 volt PN# FVP10-155

Flow Charger Voltage Pill, 15.5 volt

PN#: FVP10-155
Fitment: Universal.

Flow Charger Voltage Pill sets Flow Charger voltage boost level at 15.5 volt

Details »
List Price
$8.00
In Stock

Buy Now
Wishlist
Details

Flow Charger Voltage Pill, 16.0 volt PN# FVP10-160

Flow Charger Voltage Pill, 16.0 volt

PN#: FVP10-160
Fitment: Universal.

Flow Charger Voltage Pill sets Flow Charger voltage boost level at 16 volt

Details »
List Price
$8.00
In Stock

Buy Now
Wishlist
Details

Flow Charger Voltage Pill, 16.5 volt PN# FVP10-165

Flow Charger Voltage Pill, 16.5 volt

PN#: FVP10-165
Fitment: Universal.

Flow Charger Voltage Pill sets Flow Charger voltage boost level at 16.5 volt

Details »
List Price
$8.00
In Stock

Buy Now
Wishlist
Details

Flow Charger Voltage Pill, 17.0 volt PN# FVP10-170

Flow Charger Voltage Pill, 17.0 volt

PN#: FVP10-170
Fitment: Universal.

Flow Charger Voltage Pill sets Flow Charger voltage boost level at 17 volt

Details »
List Price
$8.00
In Stock

Buy Now
Wishlist
Details

Flow Charger Voltage Pill, 17.5 volt PN# FVP10-175

Flow Charger Voltage Pill, 17.5 volt

PN#: FVP10-175
Fitment: Universal.

Flow Charger Voltage Pill sets Flow Charger voltage boost level at 17.5 volt

Details »
List Price
$8.00
In Stock

Buy Now
Wishlist
Details

Flow Charger Voltage Pill, 18.0 volt PN# FVP10-180

Flow Charger Voltage Pill, 18.0 volt

PN#: FVP10-180
Fitment: Universal.

Flow Charger Voltage Pill sets Flow Charger voltage boost level at 18 volt

Details »
List Price
$8.00
In Stock

Buy Now
Wishlist
Details

Flow Charger Voltage Pill, 18.5 volt PN# FVP10-185

Flow Charger Voltage Pill, 18.5 volt

PN#: FVP10-185
Fitment: Universal.

Flow Charger Voltage Pill sets Flow Charger voltage boost level at 18.5 volt

Details »
List Price
$8.00
In Stock

Buy Now
Wishlist
Details

Flow Charger Voltage Pill, 19.0 volt PN# FVP10-190

Flow Charger Voltage Pill, 19.0 volt

PN#: FVP10-190
Fitment: Universal.

Flow Charger Voltage Pill sets Flow Charger voltage boost level at 19 volt

Details »
List Price
$8.00
In Stock

Buy Now
Wishlist
Details

Flow Charger Voltage Pill, 19.5 volt PN# FVP10-195

Flow Charger Voltage Pill, 19.5 volt

PN#: FVP10-195
Fitment: Universal.

Flow Charger Voltage Pill sets Flow Charger voltage boost level at 19.5 volt

Details »
List Price
$8.00
In Stock

Buy Now
Wishlist
Details

Flow Charger Voltage Pill, 20.0 volt PN# FVP10-200

Flow Charger Voltage Pill, 20.0 volt

PN#: FVP10-200
Fitment: Universal.

Flow Charger Voltage Pill sets Flow Charger voltage boost level at 20 volt

Details »
List Price
$8.00
In Stock

Buy Now
Wishlist
Details

Flow Charger Voltage Selector Module PN# FVS10

Flow Charger Voltage Selector Module

PN#: FVS10
Fitment: Universal.

Flow Charger Voltage Selector Module. This accessory module for the Flow Charger allows voltage selection from 15.5 to 20 volts with the turn of a knob.

Details »
List Price
$31.50
In Stock

Buy Now
Wishlist
Details

Featured Product 
Fuel Pump Controller, 3 Bar Internal MAP Sensor PN# FPC10-3BS

Fuel Pump Controller, 3 Bar Internal MAP Sensor

PN#: FPC10-3BS
Fitment: Universal.

Compact, high efficiency microprocessor based progressive fuel pump motor control. This version of the Fuel Pump Controller incorporates an integrated manifold pressure sensor. This eliminates the need for the 5 volt sensor input.

Details »
List Price
$157.00
In Stock

Buy Now
Wishlist
Details

Fuel Pump Controller, MAP Sensor Input PN# FPC10

Fuel Pump Controller, MAP Sensor Input

PN#: FPC10
Fitment: Universal.

Compact, high efficiency microprocessor based progressive fuel pump motor control. It incorporates a 5 volt electronic sensor input to vary the speed of the fuel pump with the sensor input. This 5 volt input is typically tapped from a MAP Sensor used in contemporary electronic engine control computers. However, the control module can use other 5 volt sensor inputs such as throttle position and mass air flow sensors as well.

Details »
List Price
$131.00
In Stock

Buy Now
Wishlist
Details

Featured Product 
GM PCM Boost Solenoid Harness, Plug-n-Play PN# BSH10-GM

GM PCM Boost Solenoid Harness, Plug-n-Play

PN#: BSH10-GM
Fitment: Universal.

GM Boost Solenoid Harness with male and female connectors to intercept signal to the solenoid from the OEM engine harness. Allows for splice free installation of the Supercharger Boost Controller.

Details »
List Price
$27.00
In Stock

Buy Now
Wishlist
Details

LS1 / LS6 Engine Harness BA PN# LS1H-BA

LS1 / LS6 Engine Harness BA

PN#: LS1H-BA
Fitment: Universal.

The Easy Performance Products LS1 / LS6 Engine Harness is intended for LS swap engine projects. All harnesses are made individually for each customer. We offer customized harnesses to meet the needs of individual engine swap projects. We understand no two custom vehicle restorations are alike. Consequently, we provide customization service to our engine harness manufacturing.

Details »
List Price
$475.00
In Stock

Buy Now
Wishlist
Details

LS1 / LS6 Engine Harness BM PN# LS1H-BM

LS1 / LS6 Engine Harness BM

PN#: LS1H-BM
Fitment: Universal.

The Easy Performance Products LS1 / LS6 Engine Harness is intended for LS swap engine projects. All harnesses are made individually for each customer. We offer customized harnesses to meet the needs of individual engine swap projects. We understand no two custom vehicle restorations are alike. Consequently, we provide customization service to our engine harness manufacturing.

Details »
List Price
$475.00
In Stock

Buy Now
Wishlist
Details

LS1 / LS6 Engine Harness CA PN# LS1H-CA

LS1 / LS6 Engine Harness CA

PN#: LS1H-CA
Fitment: Universal.

The Easy Performance Products LS1 / LS6 Engine Harness is intended for LS swap engine projects. All harnesses are made individually for each customer. We offer customized harnesses to meet the needs of individual engine swap projects. We understand no two custom vehicle restorations are alike. Consequently, we provide customization service to our engine harness manufacturing.

Details »
List Price
$525.00
In Stock

Buy Now
Wishlist
Details

Featured Product 
LS1 / LS6 Engine Harness CM PN# LS1H-CM

LS1 / LS6 Engine Harness CM

PN#: LS1H-CM
Fitment: Universal.

The Easy Performance Products LS1 / LS6 Engine Harness is intended for LS swap engine projects. All harnesses are made individually for each customer. We offer customized harnesses to meet the needs of individual engine swap projects. We understand no two custom vehicle restorations are alike. Consequently, we provide customization service to our engine harness manufacturing.

Details »
List Price
$525.00
In Stock

Buy Now
Wishlist
Details

LS1 / LS6 Engine Harness HA PN# LS1H-HA

LS1 / LS6 Engine Harness HA

PN#: LS1H-HA
Fitment: Universal.

The Easy Performance Products LS1 / LS6 Engine Harness is intended for LS swap engine projects. All harnesses are made individually for each customer. We offer customized harnesses to meet the needs of individual engine swap projects. We understand no two custom vehicle restorations are alike. Consequently, we provide customization service to our engine harness manufacturing.

Details »
List Price
$625.00
In Stock

Buy Now
Wishlist
Details

LS1 / LS6 Engine Harness HM PN# LS1H-HM

LS1 / LS6 Engine Harness HM

PN#: LS1H-HM
Fitment: Universal.

The Easy Performance Products LS1 / LS6 Engine Harness is intended for LS swap engine projects. All harnesses are made individually for each customer. We offer customized harnesses to meet the needs of individual engine swap projects. We understand no two custom vehicle restorations are alike. Consequently, we provide customization service to our engine harness manufacturing.

Details »
List Price
$625.00
In Stock

Buy Now
Wishlist
Details

Viewing 1-25 of 72 (Page 1 of 3)    
      Next >   Last >|